ISO Dual Drive long handlebar grip

[castlerobber]

I decided to swap out the SRAM Dual Drive one-handed shifter on my Q507 for a set of Dual Drive trigger shifters. I haven't had much luck finding a long handlebar grip to match the original left grip, to replace the short grip on the right side where the twist shifter was.

Does anyone have a spare long grip I could buy, or know of a reputable source? The few I saw on eBay either cost as much as the shifters themselves, or take 6 weeks to ship from Taiwan, or both.

Failing that, I'd take recommendations for a good set of ergonomic grips to use with the Q.

 

[ratz]

I decided to swap out the SRAM Dual Drive one-handed shifter on my Q507 for a set of Dual Drive trigger shifters. I haven't had much luck finding a long handlebar grip to match the original left grip, to replace the short grip on the right side where the twist shifter was.

Does anyone have a spare long grip I could buy, or know of a reputable source? The few I saw on eBay either cost as much as the shifters themselves, or take 6 weeks to ship from Taiwan, or both.

Failing that, I'd take recommendations for a good set of ergonomic grips to use with the Q.

View attachment 2783

Get two of these; they have bolts that lock them to the bars. Very nice. Basically the same grips SRAM ships with the XX series high end shifters.

http://www.outsideoutfitters.com/p-35779-sram-locking-dh-silicone-grip-set.aspx
https://www.amazon.com/SRAM-Silicone-Locking-Double-Clamps/dp/B00EPGT3K8

 

[super slim]

here is a NON SRAM lockon grip set, so no more boiling water on the grip to soften it enough to remove AND not burn your hand!

http://www.chainreactioncycles.com/au/en/clarks-clo-276-lock-on-grips/rp-prod129145