Quest3 front wheel

[jphipps]

I am considering replacing the stock 26in wheels with 700C. Does the front wheel require some dish or is offset built into frame? Looking at the 26in wheel its seems as if no dish was required but may be different than using a 700C wheel.

 

[CruzLike]

I replaced my 26 with a 700c this winter. I built the wheel without dish. It centered up in the fork just fine. You will be limited in tire size. I use a 28 Cont. GP and I needed to grind the fork a little for tire clearance. I probably took off 3/16" off of the center of the fork.