Silvio 1.0 dropout width?

ratz

Wielder of the Rubber Mallet
The would be asking a lot to get a 135mm on those forks; better off to convert the 135mm hub to 130mm which usually can be done with a little google-fu
 

super slim

Zen MBB Master
The would be asking a lot to get a 135mm on those forks; better off to convert the 135mm hub to 130mm which usually can be done with a little google-fu
There have been photos of a 135mm Rohloff hub tried to fit, but there was at least 2 mm gap on one side of the fork!

I cannot find the photo, as it was 2 or 3 years ago, and that is TOO many sleeps for an old timer like me to remember that thread it was in!
Maybe one of the YOUNG wipper snappers MIGHT remember!!!!
 

Rampa

Guru
Thanks.

I didn't think there would be any leeway, with the carbon stays. But I was hoping there might be a way. I know I can get these wheels on a T50 if I use narrow enough tires. I'll probably aim for that in the future.

Of course, I have another bike I can canabalize that has 700c with Nexus 8. I know those are road width! ;)
 
Top